walkera tx

johny.5 · Hover Master Joined: 20 Apr 2010 Posts: 7

hi was wondering if anyone knows if i can use my spare walkera tx for a 450 if i get another rx i know the walkera 22e has rudder from the onboard rx and not a seperate channel but can i use the tx for this new project or do i have to buy a new one i have both crystals one in the tx and one from the old 22e rx if so how do i find out which channel runs the rudder control. I don`t fly the 22e much newbe so i crash it a lot hence the afore mentioned spares thought that i might put a 450 together from a kit and have somthing to do while i wait for the wind to soften wont spend much at first just buy from china for the experience of building be gratefull for any help on this

pjdog · Posted: Fri May 28, 2010 11:45 pm Post subject:

Just my opinion but I think a 450 deserves a DX6I radio. Or some other very good radio. A 450 helicopter packs quite a wallop. I don't think I'd try a 450 with a Walkera radio. Maybe some of the heli pros will come along here and provide help.

I'm a newbie also and really don't have that much knowledge about radios. I heard the DX6I was one of the best so that's why I bought a Blade B400 mainly for that radio. Comes with a DX6I.

Just Me thinking here.

Jack
_________________
RC Submarines (3)
RC Planes (20)
RC Boats (3)
RC Helicopters (5) B400-EXI 450 pro-EXI 450-MSR-MCX
DX6I (2)
AMA-952547

johny.5 · Hover Master Joined: 20 Apr 2010 Posts: 7

Hi thanks pjdog thats good to know i want to build the 450 just for the build experiance so any info is appreciated would be a long time before i would be trying to fly the 450 anyway still crashing the 22e thats expencive enough Cheers for the reply

tombo242 · Posted: Sat May 29, 2010 1:31 am Post subject:

I think that using your 22e radio will not be satisfactory. As I understand it you cannot set pitch and throttle curves with it. This is essential for a 450. Your PIT knob is something that most 450 owners would be quite amused by. A little like having a hand ignition advance on a car. It is now very much yesterdays technology but geared for the 22e only.

Like PJdog says "get a DX6i" or any other good programmable 6 channel Tx. I have no problems with my DX6i but many people swear by Futaba. The choice is yours, but I would ensure that it has full range DSM2 technology and a good "Out of Range" failsafe Rx. That should keep it reasonably compatible for a year or two.
_________________
Keep Smiling Smile

scopkin · Charging Joined: 26 Jun 2010 Posts: 1

hey man yes u can use it but it can be a bit faultie

akhileshgarwal · Charging Joined: 23 Aug 2011 Posts: 2

The radio I have is Wk 2601. I don’t wish to mess around with it, but I do have a problem that the rudder stick does not work[rudder trim does if I connect the rudder servo directly without the gyro] and the elevator trim does not work[the elevator stick does]. I thought maybe the pots are bad and I might be able to replace them and fix the problem, but no such luck. I need to understand whether the stick pot and trim pot are in the same voltage sensor/divider circuit, in series or parallel and if replacing the pots might help. A new radio would be expensive. Where can I send it for repair ?
_________________
akhilesh

Pappy K · Posted: Tue Aug 30, 2011 7:56 pm Post subject:

I use a Walkera 2801 Pro Transmitter for all of my 'copters. If the 'copter comes to hand with some other Rx in it I replace it with a Walkera Rx.
_________________
You can teach and Old Dog New Tricks -or-
Don't Give Up Until a Dead Horse Kicks You!

nick_onelove · Posted: Tue Aug 30, 2011 8:49 pm Post subject:

I just got a Walkera DEVO 8 with my V100D08 (which really gives the mCP X a run for its money btw) and it is really nice.

The touch-screen programming interface is extremely intuitive, it has the familiarity of computer software. It's also eliminated the range issues the 2603/2801 supposedly had. Because of that it won't be backwards compatible with the old Walkera receivers, but I've heard they're working on a program where you can send in your old receivers to swap for the new versions.

It certainly won't be replacing my DX8 anytime soon, but I will be getting the new receivers for my other Walkera helis so I can lose the 2801-Pro.
_________________
Align: Trex 250 3GX + Trex 450 Pro with Vbar
Blade: 450 X, mCP X, 120 SR, mSR X, CX3, mCX2
Esky: Belt-CP X and V2 - Futaba: Heli-Max Axe 400
Walkera: V500D01, M120D01, V100D08, DEVO 8
Spektrum: DX8 - AMA #967873 - IRCHA #4095