Walkera 22e TX

johny.5 · Hover Master Joined: 20 Apr 2010 Posts: 7

Hi does anyone know if my 22e walkera Tx will work with a walkera 36 if i swap the crystal to the 36 rx

pjdog · Posted: Fri May 07, 2010 12:50 am Post subject:

Hello johny.5:

We would need to know what frequency both transmitters are on and both receivers.

If they are the same, say 36 then I would think that if both crystals match then your good to go.

If one is like 72 and the other is 36 then it's not going to work. Or say one is 2.4 GHz and the other 36 MHz then no.

johny.5 · Hover Master Joined: 20 Apr 2010 Posts: 7

Hi PJdog think they are both 36 can i use the crystal from my 22e rx to run the 36 with the 22e tx

tombo242 · Posted: Fri May 07, 2010 10:46 pm Post subject:

Hi,

The channels within the 36mHz will also have to be the same.

For example, both crystals marked 36:75 (36mHz: channel 75) or whatever, but the SAME numbers, for this to work. If so, there should be no problem. I have 2 craft running quite happily on 35:80 crystals with one Tx.

pjdog · Posted: Fri May 07, 2010 11:07 pm Post subject:

DIDO what Tombo242 said.

johny.5 · Hover Master Joined: 20 Apr 2010 Posts: 7

Hi thanks guys this must seem like baisic stuff to rc flyers but im brand new to this still cant fly my helli yet but geting there

pjdog · Posted: Sat May 08, 2010 8:46 pm Post subject:

We are all brand new to this. Just at different levels of brand new.