LAMA V4 holding the stabilizer set my way.

[platinum]

Generally the Lama V4 balance bar(stabilizer set) flying off all the time.
Yet there are some upgraded inner shaft/center hub set A available.
I did easy way to my V4 by using a small wire to hold the stabilizer set to center hub set A.
This help stop the balance bar flying off during normal flight.
The wire can break off and let the balance bar goes off when the impact
occur as normal design to prevent damage to the center hub, inner shaft and gear. etc.
Test flight OK fly normal not limit of the bar movement.

platinum
_________________
/Goal : relaxed flying with the least fixing.




Also we can reuse the minor deform of the center hub set A by using this method too.